Better Product. Better Seal.
It's that Simple.

Home

News
Contact Us
Accu-Seal®
Gallery

Products
Piston Rings
Plunger Rings
Retaining Rings
Small Diameter
Cylinder Components

 


Our Accu-Seal® process can produce seals to match your most difficult application. We offer rings in sizes 3/8" - 32" in diameter with virtually almost any width and radial wall. Our standard joints include:

Interlock Joint Hook Joint Butt Joint Step Joint

Rings Are Available In Following Materials:

HSI 2000: Ductile Iron, our standard material. Specification sheet on request.
CAST IRON: Pearlitic Grey Iron, similar to ASTM A48 class 40.
BRONZE: SAE 660 or Alloy of your choice.
NI-RESIST: Type I or Type II.
STAINLESS STEEL: 300 & 400 Series.
"SUPER ALLOYS": Nickel & Chrome Alloys.

Although we can furnish rings to your special sizes, the following is a list of standard commonly used rings. They can be described by their part number plus width suffix. Most rings are available in any width or wall.

Standard Widths:

Dash Number
 -03 -04 -05 -06 -08 -10 -12

Ring Width

 3/32 1/8 5/32 3/16 1/4 5/16 3/8

Std Tolerance

 .092
.0935		 .1225
.124		 .1535
.155		 .185
.1865		 .2475
.249		 .3105
.312		 .3725
.374

Standard Diameters and Walls:

Part Number
 Std Width Cylinder Diameter Standard Radial Wall
H-1001
 -06 1.500 .052 / .067
H-1002
 -06 1.625 .056 / .073
H-1003
 -06 1.750 .060 / .075
H-1005
 -06 2.000 .060 / .075
H-1007
 -08 2.250 .070 / .085
H-1009
 -08 2.500 .082 / .097
H-1011
 -08 2.750 .091 / .106
H-1013
 -08 3.000 .095 / .110
H-1015
 -10 3.250 .103 / .118
H-1017
 -10 3.500 .109 / .124
H-1019
 -10 3.750 .115 / .130
H-1021
 -10 4.000 .127 / .142
H-1022
 -10 4.250 .135 / .150
H-1023
 -10 4.500 .145 / .160
H-1024
 -10 4.750 .152 / .167
H-1025
 -10 5.000 .160 / .175
H-1026
 -10 5.250 .166 / .181
H-1027
 -10 5.500 .175 / .190
H-1028
 -10 5.750 .184 / .199
H-1029
 -12 6.000 .191 / .206
H-1030
 -12 6.250 .202 / .217
H-1031
 -12 6.500 .211 / .226
H-1032
 -12 6.750 .219 / .234
H-1033
 -12 7.000 .228 / .243
H-1034
 -12 7.250 .237 / .252
H-1035
 -12 7.500 .244 / .259
H-1036
 -12 7.750 .252 / .267
H-1037
 -12 8.000 .260 / .275
H-1038
 -12 8.250 .268 / .283
H-1039
 -12 8.500 .275 / .290
H-1040
 -12 8.750 .284 / .299
H-1041
 -12 9.000 .294 / .309
H-1042
 -12 9.250 .300 / .315
H-1043
 -12 9.500 .305 / .320
H-1044
 -12 10.000 .317 / .332

 

[ Home ] [ Up ] [ Contact Us ] [ Search ] [ Site Map ]

Send mail to srbarczak@hydra-seal.com with questions or comments about this web site.
Last modified: Wednesday, February 25, 2004